SUBMERSIBLE PUMPPUMPS INSTALLATION APPLICATIONSType deep-well pump is mainly composed by three parts:pump mechanical seals and motor.Pump is at the upperpart of motor pump. which comsists by stator and rotator.Motor is at the lower part of motor pump and is a single-phase or three-phase lower part of motor pump and is a single-phaseis between pump and motor and it is a kind of doubleendmechanical seal"O" rings are applied in all staticjoints of the submersible pump.lnner-installed protectorprevenbts the pump from damage due to abnormal power,clog and overload etc.
OPERATING CONDITIONSPH value:6-8.5 Diameter of contained particle shouldbe less than 2mm volume ratio of mixed sandy soilshould be less than 3% Liquid tem perature up to 40℃the depth or the pump under water must be less than 15m.
MOTOR2-pole induction motor 50Hz Single-phase220V+10%with thermal prote ctor capacitor inside the terminal boxthree-phase 230/400V+10% insulation class B ProtectonIP68. 110V60Hz is also available.
1.1/1.5
7.5/1.0