德国IFM电感式传感器，IV5025[产品打印页面]

 IVE3015UBPKG/US
电感式传感器
矩形塑料
接插件
抗电磁干扰的

感应距离 15 mm [f]
齐平安装

电气设计   DC PNP
输出功能   常开
  
工作电压 [V]  10...60 DC
电流负载 [mA]  200
  
短路保护   脉冲
反相保护   是
过载保护   是
电压降 [V]  < 3
  
电流损耗 [mA]  < 20 (24 V)
  
实际感应距离 (Sr) [mm]  15 ± 10 %
工作距离 [mm]  0...12.1
开关点偏移 [Sr的百分比]  -10...10
迟滞 [Sr的百分比]  3...15
开关频率 [Hz]  50
修正系数   钢(St37) = 1 / 不锈钢约0.85 / 黄铜约0.4 / Al约0.4 / Cu约0.3
  
环境温度 [°C]  -25...70
防护等级   IP 67, II
EMC电磁兼容   EN 60947-5-2  
EN 55011:  等级B 
 
外壳材料   改良的PPE
功能显示   
开关状态 LED  黄色
  
接口   M12接插件
  
重量 [kg]  0.259
注释   有效区的5个位置可选

德国IFM电感式传感器，IV5025

 Function and features
This sensor detects metals without contact and indicates their presence by
providing a switched signal. Nominal sensing range (Sn): see type lable; Operating
distance 0...[Sn x 0.81] mm (values based on standard measurement with mild
steel; a shorter sensing range for other metals).
Installation
Screw the sensor to a firm base.
If there is high mechanical stress,
ensure that it cannot work loose.
Flush mountable (fig. 1 and 2).
Open space around the sensing face
when mounted in metal: fig. 3.
Minimum distance when several
sensors of the same type are
mounted: fig. 4 and 5.

Electrical connection
Disconnect power before connecting the sensor. Open the sensor (fig. 6);
connect the cable in accordance with the instructions on the type lable.
Use cable gland to maintain protection IP67; cable gland not supplied.
6
LEDs
7
Alignment of the sensing face
Remove the sensor cube (fig. 7); align the sensing face and re-insert the sensor
cube.
Operation
Check the safe functioning of the sensor.
The green LED is lit when the supply voltage is applied.
The yellow LED is lit when the output is switched.
The operation of the sensor is maintenance-free. For perfect functioning make
sure that:
the sensing face and the open space are kept free of metal deposits and
foreign bodies, particularly for installation with the sensing face facing upwards;
EMC: The unit conforms to the requirements of EN 60947-5-2.

德国IFM电感式传感器，IV5025

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!