德国IFM电感式传感器，IM5022[产品打印页面]

 德国IFM电感式传感器，IM5022

电 话：O213952 9829/3O8O1O
传 真：O216O83 1959
手 机：189 1857 2467
QQ：125 5O9 6653
联 系人：张海情
邮 箱：8010@shqiantuo.com.cn

IME3015BFPKG
电感式传感器
矩形塑料
接线端子

感应距离 15 mm [f]
齐平安装

电气设计   DC PNP
输出功能   常开 / 常闭可选
  
工作电压 [V]  10...36 DC
电流负载 [mA]  250
  
短路保护   脉冲
反相保护   是
过载保护   是
电压降 [V]  < 2.5
  
电流损耗 [mA]  < 15 (24 V)
  
实际感应距离 (Sr) [mm]  15 ± 10 %
工作距离 [mm]  0...12.1
开关点偏移 [Sr的百分比]  -10...10
迟滞 [Sr的百分比]  1...15
开关频率 [Hz]  350
修正系数   钢(St37) = 1 / 不锈钢约0.7 / 黄铜约0.4 / Al 约 0.3 / Cu约0.2
  
环境温度 [°C]  -25...80
防护等级   IP 65, II
EMC电磁兼容   EN 60947-5-2  
EN 55011:  等级B 
 
MTTF [年]  1612
外壳材料   PPE
功能显示   
开关状态 LED  黄色
运行 LED  绿色
  
接口   接线端子至2.5 mm²; 电缆直径 7...13 mm, 电缆螺旋套管接头M20 x 1.5
  
重量 [kg]  0.191

德国IFM电感式传感器，IM5022

 This sensor detects metals without contact and indicates their presence by providing
a switched signal. The nominal sensing range (Sn) can be seen in the type
designation on the type label on the unit; operating distance (Sa) 0 ... 0,81 x Sn;
(values based on standard measurement with mild steel; a shorter sensing range
for other metals).

Screw the proximity switch to a firm
base. If there is high mechanical stress,
ensure that it cannot work loose.
Flush mountable (fig. 1 and 2).
When mounted in metal, the metal must
not protrude over the sensing face.
• Open space in front of the sensing
face when mounted in metal: fig. 3.
• Minimum distance when several
sensors of the same type are
mounted: fig. 4 and 5.

Disconnect power before connecting the sensor. Open the sensor (fig. 6);
connect cable in accordance with the instructions on the type label.
Note: insert a miniature fuse according to the technical data sheet, if specified.
Recommendation: check the unit for reliable function after a short cirucit.
Programming of the output function:
Units which are not programmed by means of connections are provided in N.O.
Open the wire link for programming the N.C. function (fig. 7A).

德国IFM电感式传感器，IM5022

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!