德国IFM光电传感器，OGT102[产品打印页面]

 德国IFM光电传感器，OGT102

电 话：O21-3952 9829/3O-8O1O
传 真：O21-6O83 1959
手 机：189 1857 2467
QQ：125 5O9 6653
联 系人：张海情
邮 箱：8010@shqiantuo.com.cn

产品特征
漫反射传感器
螺纹结构
M18 x 1
接插件
电位器
检测距离 10...400mm (参照白纸200 x 200 mm, 90 %反射)
可设定
 电气数据
电气设计   DC NPN
工作电压 [V]  10...30 DC
电流损耗 [mA]  20
光线种类   红光
防护等级   III
反相保护   是
 输出
输出功能   light-on模式
电压降 [V]  < 2.5
电流负载 [mA]  200
短路保护   是
过载保护   是
开关频率 [Hz]  1000
 监控范围
光斑直径 [mm]  25 ( 在的检测距离 ) 
 测量/设定范围
设定范围 [mm]  70...400
 环境条件
环境温度 [°C]  -25...60
外壳防护等级   IP 65 )
 认证/测试
EMC电磁兼容   EN 60947-5-2
MTTF [年]  894
 机械技术数据
外壳材料   外壳: ABS
透镜材料   PMMA
重量 [kg]  0.144
 显示器/操作件
开关状态显示 LED  黄色
 电气连接
接口   M12接插件
接线
 - 接线~打印接线图~
  
 附件
配件(同时供货)   2个固定螺母
 注释
注释   ) 与相应的接插件连接

德国IFM光电传感器，OGT102

1 Preliminary note
1.1 Symbols used
. Instruction
> Reaction, result
→ Cross-reference
Important note
Non-compliance can result in malfunctions or interference.
2 Functions and features
The diffuse reflection sensor detects objects and materials without contact and
indicates their presence by a switching signal.
Range: → packaging or data sheet.
3 Installation
1: LED
2: setting potentiometer
. Align the diffuse reflection sensor to the object to be detected.
. Secure it to a bracket.
4 Electrical connection
The unit must be connected by a qualified electrician.
. The national and international regulations for the installation of electrical
equipment must be adhered to.
. Ensure a voltage supply according to EN 50178, SELV, PELV.
. Disconnect power.
. Connect the unit as follows:

Settings
1: LED
2: setting potentiometer
. Set the setting potentiometer to the minimum range.
. Position the object to be detected in the detection zone.
. Increase the range until the LED lights (= minimum value; object detected).
. Remove the object from the detection zone.
> LED goes out.
. Increase the range until the LED lights (= maximum value; background detected).
. Set the range to the middle position between minimum value and maximum
value.
5 Operation
. Check whether the unit operates correctly.
. Dark-on switching units: the output is switched / the yellow LED is lit when no
object is detected.
. Light-on switching units: the output is switched / the yellow LED is lit when an
object is detected.

德国IFM光电传感器，OGT102

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!