德国FESTO连接电缆，NEBU-M12G5-K-2，5-LE4[产品打印页面]

 德国FESTO连接电缆，NEBU-M12G5-K-2，5-LE4

电话：O21-3952 9829/3O-8O1O
传真：O21-6O83 1959
手机：189 1857 2467
QQ：125 5O9 6653
联系人：张海情
邮箱：8010@shqiantuo.com.cn

特性  特性
  标准产品
 
电缆属性  标准
适合于拖链
用于机器人
Basic
工作状态显示  黄色 LED
用于 NPN - 常开
用于PNP - 常开
LED, 蓝色
适用于 PNP N/C 触点
工作电压范围 AC  0 ... 250 V 
工作电压范围 DC  0 ... 250 V 
污染等级  3 
CE 符号 (参见符合的标准)  根据 EU low 电压 指导原则 
防护等级  IP65
IP68
电连接  2芯
2针
3芯
3针
4芯
4针
5-adrig
5针
Rotatable socket
直列式插头插座
直角式插头插座
M12x1
M8x1
直列式插头
直角式插头
可旋转螺纹
开放式末端
电缆长度  0.1 ... 30 m 
锁紧螺母的材料信息  黄铜
镀镍
材料备注  无卤素电缆
耐油电缆
不含有黄铜和PTFE
符合 RoHS
外壳的材料信息  TPE-U(PU) 
电缆护套的材料信息  PVC
TPE-U(PU)

德国FESTO连接电缆，NEBU-M12G5-K-2，5-LE4

 Under normal operating conditions,
pneumatic valves from Festo can be
operated with lubricated or unlubricated
compressed air.
If any particular product requires a
different quality of compressed air, this is
indicated in the technical data for the
relevant product.
Operation with unlubricated compressed
air is made possible by the selection of
the material combinations, the shape of
the dynamic seals and the basic
lubrication applied ex works.
Operation with unlubricated compressed
air is not possible under the following
operating conditions:
• Once the valves have been operated
with lubricated compressed air, it is
essential that lubricated compressed
air is always used subsequently since
the oil in the lubricated air will have
flushed away the basic lubrication.
• In all cases, a grade of filtration is
required that removes contaminants
up to 40 μm (standard filter cartridge
version).
Micro compressed air filtration may be
required for special applications.

Standard nominal flow rate qnN is the
flow rate characteristic used by Festo for
a device or component expressed in
l/min.
The standard nominal flow rate qnN is
the flow rate based on standard conditions
(to DIN 1343) under the following
measurement conditions:
?Test medium air
?Temperature 20 ? 癈 (temperature of
medium)
?Test specimen at ambient temperature
?The pressures to be set are for components
with constant cross section
(e.g. directional control valves):
Supply pressure p1 = 6 bar
Output pressure p2 = 5 bar
Standard conditions to DIN 1343:
?tn = 0 癈 (standard temperature)
?pn = 1.013 bar (standard pressure)
Exception 1:
Silencer
Supply pressure p1 = 6 bar
Output pressure p2 = pamb
pamb = atmospheric pressure
Exception 2:
Low-pressure components
Supply pressure p1 = 0.1 bar
Output pressure p2 = pamb
Exception 3:
For pressure regulators:
Supply pressure p1 = 10 bar (constant)
and output pressure p2 = 6 bar
at q = 0 l/min are set for the test specimen.
Subsequently, the flow rate is
slowly and constantly increased using
the flow control valve until the output
pressure reaches a value of p2 = 5 bar.

The nominal size provides information
about the smallest cross section in the
main flow of the valve. It specifies the
diameter of the orifice and is expressed
in mm. This is a measurement that only
provides a limited comparison between
different components. To compare
products, the standard nominal

Standard nominal flow rate qnN is the
flow rate characteristic used by Festo for
a device or component expressed in
l/min.
The standard nominal flow rate qnN is
the flow rate based on standard conditions
(to DIN 1343) under the following
measurement conditions:
• Test medium air
• Temperature 20 ±3 °C (temperature of
medium)

德国FESTO连接电缆，NEBU-M12G5-K-2，5-LE4

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,��您留下您的详细联系方式!