图尔克流量传感器，FCS-G1/2HB2-NA-H1141
电话：O21-3952 9829/3O-8O1O
传真：O21-6O83 1959
手机：189 1857 2467
QQ：125 5O9 6653
联系人：张海情
邮箱：8010@shqiantuo.com.cn
公司网站：www.qiantuomy.com
配合信号处理器使用的插入式流量传感器
液体监测流量传感器
热式功能原理
通过电位器调节报警点
通过LED显示流量状态
探头材质Hastelloy B2
M12 x 1接插件
4-线制连接处理器
The portfolio comprises inductive, magnetic-inductive, capacitive, photoelectric, ultrasonic, pressure, temperature and flow sensors.
流量传感器可以快速和可靠地检测气体或液体的流速是否超出规定的正常范围，并且在自动化制造行业中得到了广泛地应用。
它们可以用于监控流量极限值和流量曲线，但并不适用于高精度的测量。 对于流量传感器来说，高重复精度是重要的特性之一。
典型应用包括：冷却液循环监控，泵的空转保护，废气排放管道的流量监控以及空调通风系统监控等。
TURCK流量传感器分为一体式紧凑型流量传感器和分体式流量传感器两种。
图尔克流量传感器，FCS-G1/2HB2-NA-H1141
Signal processing unit to
connect remote insertion and
inline sensors
■ Sensor and signal processing unit are
individual units
■ Small housing styles and minimal space
requirements
■ Adjustment and display at the signal
processor in the control cabinet
■ Adjustment via potentiometer, easy
handling
■ Three different versions are available:
MS96/MK96/MC96
■ Transistor, relay or current output
■ Also for connection of sensors in zone
0 and 1
■ FCS series: Insertion principle
– Suited for all nominal pipe diameters
from DN20
– Different immerson lengths
– High-pressure version up to 500 bar
(only for mounting in zone 1)
– High-temperature version up to 120 °C
(only for mounting in zone 1)
– Adjustable range between 1 cm/s and
200 cm/s
■ FCI series: Inline principle
– Ideal for smaller nominal pipe diameters
up to DN10, suited for smaller
flow rates
– Short response time within seconds
– No disturbing built-in components,
free pipe cross section, no pressure
loss
– Adjustable range between 10 ml/min
and 1.8 l/min
Intrinsically safe sensors
for gaseous media
■ Sensor and signal processing unit are individual
units
■ Small housing styles and minimal space requirements
■ Sensors for zone 0 and 1 available, mounting in
explosion hazardous area
■ Adjustment and display at the signal processor
■ Adjustment via potentiometer, easy handling
■ High degree of protection IP68, maximum
mounting freedom
■ Relay output
■ FCS series: Insertion principle
– Suited for all nominal pipe diameters from
DN20
– High-temperature version up to120 °C
– Adjustable range between 2 m/s and
20 m/s
Flow sensors
The detection of flow rates does not require
exact and costly measuring but rather
a reliable monitoring of limit values. Flow
sensors thus have to provide a high degree
of reproducibility. They detect not only limit
values of flow rates but also the flow drift,
meaning the increase or decrease of flow
rate. Regarding the flow, the output signal is
either analog or binary, depending on whether
continuous measurement is required
or the monitoring of a limit value.
Flow meters
Many processes require a steady flow rate of
media in order to guarantee smooth operation
and to maintain the quality level of production
output. Therefore the measuring of
flow rates not only requires a high degree
of reproducibility but also accuracy. The
current flow rate is shown on the display of
the flow meter and a corresponding signal
is given out. The output signal can either be
analog or binary, depending on whether
continuous measurement is required or the
monitoring of a limit value.
图尔克流量传感器，FCS-G1/2HB2-NA-H1141
- 温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
- 免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报
