产品[
HERION空气过滤器，2622084.3050.02400[产品打印页面]
]资料
如果您对该产品感兴趣的话,可以
产品名称:
HERION空气过滤器，2622084.3050.02400
产品型号:
2622084.3050.02400
产品展商:
HERION
关注指数:1008
产品文档:
无相关文档
简单介绍
HERION空气过滤器，2622084.3050.02400
springs 5 and 6 into the position shown. The ducts 17
and 19 are closed, while the ducts 7 and 8 are opened.
This causes the upper side of piston 14 to be
HERION空气过滤器，2622084.3050.02400
的详细介绍
HERION空气过滤器，2622084.3050.02400
螺纹 代号
PTF A
ISO Rc 锥螺纹 B
ISO G直螺纹 G
溢流阀可调至大于或小于表列压力范围，为此
切勿在规定范围外使用
17 bar溢流阀仅用T型调节手柄，订货代号第
七位为T，第九位为S
气口尺寸 代号
1/4" (72) 2
3/8" 3
1/2" (74) 4
3/4" (74) 6
Spare units may only be operated with the original HERION-subplate (see page 16). The spare valve is equipped with a new
When changing the valves, the sealing surfaces must be clean and the seals must be properly positioned.
Observe the specified tightening torques for the screws! Prior to commissioning, a test must be carried out according to the operating instructions
and test instructions (see page 18).
3) Oil recommendation: Shell Hydrol DO 32, Esso Febis K 32 (as of 07/92) or similar oils with DVI values < 8 (DIN 53521) and
ISO viscosity class 32-46 (DIN 51519).
Filtration: 25 – 50 μm
Q Q：1214O25O68
联 系 人：曾凡莉
手 机：18917O384O7
传 真：O21-6O83 1958
Email：18917O384O7@189.com
In the position shown in Figure 1, the solenoids 1 and 2
are deenergized, the solenoid armatures 3 and 4,
assisted by the pressure springs 5 and 6, cover the
control ducts 7 and 8. The control duct 8 is linked to the
annular duct 9, and the control duct 7 to the annular duct
10. Because of the clearance between the body 11
and the pistons 12 and 13, the control ducts 7 and 8 are
pressurized. The control pistons 14 and 15 are
exhausted via the ducts 16 and 17 or 18 and 19
respectively. Piston 12 closes ducts 20 and 21,
and piston 13 ducts 22 and 23.
The energization of the solenoids 1 and 2 causes the
solenoid armatures 3 and 4 to be pulled against the
pressurized via the ducts 16, 7 and 21, while the upper
side of piston 15 is pressurized via the ducts 18, 8, 23.
This causes the pistons 14 and 12 or 13 and15 to move
to the position shown. P is linked to A via the piston 12
(ducts 21 and 22) or the piston 13 (ducts 23 and 20).
- 温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
- 免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报
