产品[
巴鲁夫电磁传感器,BES 516-113-S4-C[产品打印页面]
]资料
如果您对该产品感兴趣的话,可以
产品名称:
巴鲁夫电磁传感器,BES 516-113-S4-C
产品型号:
BES 516-113-S4-C
产品展商:
BALLUFF
关注指数:424
产品文档:
无相关文档
简单介绍
巴鲁夫电磁传感器,BES 516-113-S4-C
主要功能尺寸M12
连接接插件, M12x1的-S04
开关量输出/功能PNP / NO / NC
工作电压10 ... 30 V DC
巴鲁夫电磁传感器,BES 516-113-S4-C
巴鲁夫电磁传感器,BES 516-113-S4-C
的详细介绍
巴鲁夫电磁传感器,BES 516-113-S4-C

主要功能尺寸M12
连接接插件, M12x1的-S04
开关量输出/功能PNP / NO / NC
工作电压10 ... 30 V DC
机械安装条件冲洗(屏蔽)
额定工作距离Sn 2mm
一般属性就绪延时tv。 40ms
使用类别为DC 13
开关频率。 F。 3000Hz
温度漂移值。 ( %的SR ) 10 %
重复ACCUR 。 R。 ( %的SR ) 5 %
电源指示灯无
功能指示灯是
短路保护是
防护等级II
反极性保护是
防止误配线是
带连接器, E。 G。 BKS -S 20 - ...总长度=长度开关19mm。
电气输出电阻Ra属性33.0K + D
额定工作电压Ue 24 V DC
有效的工作电流Ie 200mA
额定绝缘电压Ui 250AC
额定短路电流100 A
电子版直流,直流
迟滞H。 (在%锶的) 15 %
在0 mA小工作电流
负载电容。 (在UE) 0.5 uF的
无负载电流Io衰减。 8mA
空载电流。木卫一无阻尼8mA
断态电流Ir。 50μm
纹波。 (占UE) 15
开关输出PNP
开关功能NO / NC
电压降静态。 1.5 V
操作感应原理
工作电压10 ... 30 V DC
机械特性环境温度-40 ... 85 °C
拧紧扭矩20 Nm
可靠工作距离sa 0 .. 1.6mm
连接器类型M12x1的-S04
EFF的。开关距离锶2mm
冲击冲击等级,半正弦波, 30 GN , 11ms
55赫兹, 1mmAMPL 。 , 3×30 min振动评级
3污染程度
感应面材料PA 12
外壳材料不锈钢
SR容差±10 %
巴鲁夫电磁传感器,BES 516-113-S4-C
Keyfeatures Size M12
Connection Connector, M12x1-S04
Switching output / function PNP/NO/NC
Operating voltage 10...30 V DC
Mechanical installation condition Flush (shielded)
Rated operating distance Sn 2 mm
General attributes Ready delay tv max. 40 ms
Utilisation category DC 13
Switching freq. f max. 3000 Hz
Temp. drift max. (% of Sr) 10%
Repeat accur. R max. (% of Sr) 5 %
Power indicator No
Function indicator Yes
Short-circuit protected Yes
Protection class II
Protected against polarity reversal Yes
Protected against miswiring Yes
With connector, e.g. BKS-S 20-… total length = switch length +19 mm.
Electrical attributes Output resistance Ra 33.0k + D
Rated operating voltage Ue DC 24 V
Effective operating current Ie 200 mA
Rated insulation voltage Ui 250 AC
Rated short circuit current 100 A
Electrical version DC, direct current
Hysteresis H max. (in % of Sr) 15 %
Minimum operating current Im 0 mA
Load capacitance max. (at Ue) 0,5 µF
No-load current Io damped max. 8 mA
Max. no-load cur. Io undamped 8 mA
Off-state current Ir max. 50 µA
Ripple max. (% of Ue) 15
Switching output PNP
Switching function NO/NC
Voltage drop static max. 1,5 V
Principle of operation Inductive
Operating voltage 10...30 V DC
Mechanical attributes Ambient temperature -40...85 °C
Tightening torque 20 Nm
Assured operating distance Sa 0...1,6 mm
Connector type M12x1-S04
Eff. switching distance Sr 2 mm
Shock rating Shock, half-sinus, 30 gn, 11ms
Vibration rating 55 Hz, 1 mm ampl., 3x30 min
Degree of contamination 3
Sensing surface material PA 12
Housing material Stainless steel
Tolerance Sr ±10 %
巴鲁夫电磁传感器,BES 516-113-S4-C
- 温馨提示:为规避购买风险,建议您在购买前务必确认供应商资质与产品质量。
- 免责申明:以上内容为注册会员自行发布,若信息的真实性、合法性存在争议,平台将会监督协助处理,欢迎举报