FESTO电磁阀,SMC电磁阀,SMC定位器,SMC气管,SMC比例阀,ABB电机,HYDAC电磁阀,DAIKIN油泵,YUKEN比例阀,schrack继电器,ATOS电磁阀,SMC气缸,FESTO气缸,BURKERT电磁阀,ASCO电磁阀

产品资料
首页 >>> 产品目录 >>> ASCO(世格)电磁阀 >>> ASCO气控阀
泵阀网 >>> 展馆展区 >>> 其他 >>> 其他 >>> 美国JOUCOMATIC气控阀
产品[

美国JOUCOMATIC气控阀[产品打印页面]

]资料
如果您对该产品感兴趣的话,可以 产品名称: 美国JOUCOMATIC气控阀
产品型号: -
产品展商: 美国ASCO阿斯卡
关注指数:658
产品文档: 无相关文档

简单介绍

美国JOUCOMATIC气控阀  PFDAVG is only valid when used as Normally Closed • Valves are especially suited for heavy duty industrial applications • Balanced poppet construction

美国JOUCOMATIC气控阀  的详细介绍
美国JOUCOMATIC气控阀
There are two exhaust flows in the exhaust mode (pilot and main). The pilot exhaust must be connected to the main exhaust when the air or inert gas cannot be exhausted to atmosphere.
 For "Quick Exhaust" valves, pressure port is 1/20", exhaust port is 1/4".
 IMPORTANT: A Minimum Operating Pressure Differential must be maintained between the pressure and exhaust ports. Supply and exhaust piping must be full area, unrestricted.
ASCO flow controls and other similar components must be installed in the cylinder lines only.
 Diaphragm and main disc FKM only (pilot is low-temperature NBR).
 Zero minimum when valve selection gasket is in external position and proper auxiliary air pressure is applied. Minimum 15 psi Operating Pressure Differential when selection gasket
is in the internal position.
 Normally closed = 130 psi. Normally open = 105 psi.
• The solenoid valves do not require a minimum operating pressure
• Solenoid valves with explosionproof operator NA or NB type for use in potentially
explosive atmospheres according to ATEX Directive 94/9/EC
EC type examination certifi cate no : BAS 02 ATEX 2157
• Compliance with the Essential Health and Safety Requirements of the ATEX
Directive has been assured by compliance with the European Standards
EN 60079-0, EN 60079-1, EN 61241-0 and EN 61241-1
Differential pressure See "SPECIFICATIONS" [1 bar =100 kPa]
Maximum viscosity 65 cSt (mm2/s)
Response time 75 - 100 ms
fl uids (✴) temperature range (TS) seal materials (✴)
air, inert gas, water, oil - 38°C to + 50°C NBR (nitrile)
MATERIALS IN CONTACT WITH FLUID
) Ensure that the compatibility of the fl uids in contact with the materials is verifi ed
Brass body Stainless steel body
Body and seat Brass AISI 316
Core tube Stainless steel Stainless steel
Core and plugnut Stainless steel Stainless steel
产品留言
标题
联系人
联系电话
内容
验证码
点击换一张
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!
  • 温馨提示:为规避购买风险,建议您在购买前务必确认供应商资质与产品质量。
  • 免责申明:以上内容为注册会员自行发布,若信息的真实性、合法性存在争议,平台将会监督协助处理,欢迎举报


产品搜索

联系我们
产品目录
Copyright@ 2003-2024  上海乾拓贸易有限公司版权所有        
 

沪公网安备 31011402005013号

点击这里给我发消息 点击这里给我发消息 点击这里给我发消息 点击这里给我发消息 点击这里给我发消息 点击这里给我发消息 点击这里给我发消息