产品[
BALLUFF电感式传感器,BES M08EG1-NSC15S-S04G-S[产品打印页面]
]资料
如果您对该产品感兴趣的话,可以
产品名称:
BALLUFF电感式传感器,BES M08EG1-NSC15S-S04G-S
产品型号:
BES M08EG1-NSC15S-S04G-S
产品展商:
BALLUFF
关注指数:463
产品文档:
无相关文档
简单介绍
BALLUFF电感式传感器,BES M08EG1-NSC15S-S04G-S
可靠工作距离萨1,2
EFF的。开关距离锶1,50mm
公差锶±10%
迟滞H。 (以%锶的)10%
重复ACCUR 。 R。的(Sr的%)5%
BALLUFF电感式传感器,BES M08EG1-NSC15S-S04G-S
BALLUFF电感式传感器,BES M08EG1-NSC15S-S04G-S
的详细介绍
BALLUFF电感式传感器,BES M08EG1-NSC15S-S04G-S

特性数据
可靠工作距离萨1,2
EFF的。开关距离锶1,50mm
公差锶±10%
迟滞H。 (以%锶的)10%
重复ACCUR 。 R。的(Sr的%)5%
环境温度-25 ... 70 °C
温度。漂移值。的(Sr的百分比) 10%
开关频率。 F。 20Hz
准备延迟电视多。 20ms
应用类别DC 13
功能指示灯是
电源指示灯无
短路保护是
反极性保护是
BES M08EG1-NSC15S-S04G-S,德国巴鲁夫传感器
防止误配线无
电气数据
工作电压10 ... 30 V DC
纹波。 ( UE的% ) 15
额定工作电压Ue DC 24,0 V
电压降静态。 2 V
额定绝缘电压Ui 75直流电
有效的工作电流Ie 100mA
无负载电流Io衰减。 10mA
。空载电流。木卫一无阻尼10mA
断态电流Ir。 10 μA
小工作电流Im 0mA
额定短路电流100 A
机械数据
连接类型连接器
连接器类型M12x1的-S04
外壳材料不锈钢
感应面材料不锈钢
靶材料选择性铁
安装长度1.57英寸
震撼评级冲击,半窦, 30 GN , 11ms
振动等级55Hz, 1mmAMPL 。 , 3×30分钟
3污染程度
拧紧力矩为5 Nm
备注
该传感器是功能性的再次过载消除后。
铁 - 铁磁性钢的被检测;合金(铝,黄铜,铜)
带连接器,例如BKS -S 20 - ...总长度=开关长度18mm。
BALLUFF电感式传感器,BES M08EG1-NSC15S-S04G-S
Characteristic data
Assured operating distance Sa 1,2
Eff. switching distance Sr 1,50 mm
Tolerance Sr ±10 %
Hysteresis H max. (in % of Sr) 10 %
Repeat accur. R max. (% of Sr) 5 %
Ambient temperature -25...70 °C
Temp. drift max. (% of Sr) 10%
Switching freq. f max. 20 Hz
Ready delay tv max. 20 ms
Utilisation category DC 13
Function indicator Yes
Power indicator No
Short-circuit protected Yes
Protected against polarity reversal Yes
Protected against miswiring No
Electrical data
Operating voltage 10...30 V DC
Ripple max. (% of Ue) 15
Rated operating voltage Ue DC 24,0 V
Voltage drop static max. 2 V
Rated insulation voltage Ui 75 DC
Effective operating current Ie 100 mA
No-load current Io damped max. 10 mA
Max. no-load cur. Io undamped 10 mA
Off-state current Ir max. 10 μA
Minimum operating current Im 0 mA
Rated short circuit current 100 A
Mechanical data
Connection type Connector
Connector type M12x1-S04
Housing material Stainless steel
Sensing surface material Stainless steel
Target material Selective Ferrous
Mounting length 40 mm
Shock rating Shock, half-sinus, 30 gn, 11ms
Vibration rating 55 Hz, 1 mm ampl., 3x30 min
Degree of contamination 3
Tightening torque 5 Nm
Remarks
The sensor is functional again after the overload has been eliminated.
Ferrous - Ferromagnetic steel is detected; alloys (aluminium, brass, copper)
With connector, e.g. BKS-S 20-… total length = switch length +18 mm.
BALLUFF电感式传感器,BES M08EG1-NSC15S-S04G-S
- 温馨提示:为规避购买风险,建议您在购买前务必确认供应商资质与产品质量。
- 免责申明:以上内容为注册会员自行发布,若信息的真实性、合法性存在争议,平台将会监督协助处理,欢迎举报