FESTO电磁阀,SMC电磁阀,SMC定位器,SMC气管,SMC比例阀,ABB电机,HYDAC电磁阀,DAIKIN油泵,YUKEN比例阀,schrack继电器,ATOS电磁阀,SMC气缸,FESTO气缸,BURKERT电磁阀,ASCO电磁阀

产品资料
首页 >>> 产品目录 >>> 日本SMC电磁阀/气缸 >>> SMC压力开关
泵阀网 >>> 展馆展区 >>> 其他 >>> 其他 >>> SMC压力开关,日本SMC压力开关
产品[

SMC压力开关,日本SMC压力开关[产品打印页面]

]资料
如果您对该产品感兴趣的话,可以 产品名称: SMC压力开关,日本SMC压力开关
产品型号: -
产品展商: SMC
关注指数:435
产品文档: 无相关文档

简单介绍

SMC压力开关,日本SMC压力开关 series because it is the non-lube style. 1. Operating the pneumatic circuit Instead of the conventional reciprocal air cylinder circuit, use an pneumatic

SMC压力开关,日本SMC压力开关  的详细介绍
SMC压力开关,日本SMC压力开关
Before piping is connected, it should be
thoroughly blown out with air (flushing)
or washed to remove cutting chip,
cutting oil and other debris from inside
2. The load on the piston rod
Use the cylinder in the state in which
the load to the piston rod is always
applied in the axial direction. This must
be more strictly adhered to than with
ordinary air cylinders. Furthermore, use
a guide to control the movement of the
load so as not to cause chatter or twist.
3. A rotational force against the piston
Avoid applying a rotational force
against the piston rod. In particular, the
application of a rotational force must be
prevented when in a lock-up state.
4. Protecting the sliding portion of the
Use caution that no scratch or dent will
be given to the slide part of the guide
rod, as this could damage the seals
and lead to leaks or faulty lock-up.
It is not necessary to lubricate the CL
circuit, in which measures are taken to
prevent the piston from lurching after
the lock-up has been disengaged.
2. Lock-up direction
The lock-up is unidirectional. The
locking direction is in accordance with
the position of the lock-up port, as
shown in the figure below.
Extension locking
产品留言
标题
联系人
联系电话
内容
验证码
点击换一张
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!
  • 温馨提示:为规避购买风险,建议您在购买前务必确认供应商资质与产品质量。
  • 免责申明:以上内容为注册会员自行发布,若信息的真实性、合法性存在争议,平台将会监督协助处理,欢迎举报


产品搜索

联系我们
产品目录
Copyright@ 2003-2024  上海乾拓贸易有限公司版权所有        
 

沪公网安备 31011402005013号

点击这里给我发消息 点击这里给我发消息 点击这里给我发消息 点击这里给我发消息 点击这里给我发消息 点击这里给我发消息 点击这里给我发消息