如果您对该产品感兴趣的话,可以
产品名称:
SMC桨叶式流量开关
产品型号:
-
产品展商:
SMC
关注指数:448
产品文档:
无相关文档
简单介绍
SMC桨叶式流量开关
4. Use at or below the maximum operating pressure and
5. The indicator on the window name plate (Fig. 1) is only a
SMC桨叶式流量开关
的详细介绍
SMC桨叶式流量开关
按噪声模拟器方形波噪声 (脉冲宽度1μs)电源端子间±2000V；输入输出线间±600V
10 ～ 55Hz; 振幅0.75mm; X, Y, Z方向各2小时
10 G; X, Y, Z方向各3次
外壳与AC线间: AC1500V、1分钟
外壳与信号接地间: AC500V、1分钟
外壳与AC线间: DC500V, 50M 以上
高精度行程可读出气缸与多输出计数器间超过23m时，
应使用发送接受信号盒(CE1-H0374)。
型号(计数器侧) : DX10M-36S
连接插头型号 : DX30AM-36P
带插头的BCD电缆另行商谈。
1. To adjust flow, remove grommet of the upper cover and rotate
flow adjusting gear using a flat head screwdriver.
Turning clockwise can increase the set flow and turning
counterclock can decrease the set flow.
2. The flow rate setting point is set at the ON flow rate. Therefore,
in the case of the 1a contact, the ON signal is output if fluid
with a higher flow rate than the set flow rate has occurred.
In the case of the 1b contact, the ON signal is output when the
flow rate has decreased from the set flow rate for the amount
that corresponds to the hysteresis.
3. To prevent the chattering that is associated with the fluctuation
of the operating flow rate, set the difference between the set
flow rate and the operating flow rate so that it is as large as
downstream side of the flow switch, and set the level.
Also, when setting levels with a low flow rate at pressures of
0.2 MPa or more, there may be interference between the
indicator needle and the scale plate. In such cases, detach the
indicator needle and scale plate before setting. After setting,
the indicator needle and scale plate can be reattached in
- 温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
- 免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报
