FESTO电磁阀,SMC电磁阀,SMC定位器,SMC气管,SMC比例阀,ABB电机,HYDAC电磁阀,DAIKIN油泵,YUKEN比例阀,schrack继电器,ATOS电磁阀,SMC气缸,FESTO气缸,BURKERT电磁阀,ASCO电磁阀

产品资料
首页 >>> 产品目录 >>> BURKERT(宝德)电磁阀 >>> burkert电磁阀
泵阀网 >>> 展馆展区 >>> 阀门 >>> 电磁阀 >>> 宝得两位五通防爆电磁阀
产品[

宝得两位五通防爆电磁阀[产品打印页面]

]资料
如果您对该产品感兴趣的话,可以 产品名称: 宝得两位五通防爆电磁阀
产品型号: -
产品展商: BURKERT
关注指数:403
产品文档: 无相关文档

简单介绍

宝得两位五通防爆电磁阀 The flow rate sensor can be installed in either horizontal or vertical pipes. For pH and ORP measurements, we recommended a “U”-form bypass installation to ensure

宝得两位五通防爆电磁阀  的详细介绍
宝得两位五通防爆电磁阀
压力限制可能取决于传感器。请参阅
适当的使用说明书或数据表的更多
1 )拟合和传感器之间的组合,有时**于一些DN (参见图: S020结合
Universal fitting for INSERTION sensors, transmitters,
batch controllers in pure, aggressive or contamined liquids
Large range of process connections: DN 06 to 400
in PVC, PP, PVDF, PE, stainless steel, brass
Electronics available for
- Indication, Monitoring, Transmitting
- On/Off control, Batch control
Minimum straight upstream and downstream distances must be observed. According to the pipe’s design, necessary distances can be bigger or use a
flow conditioner to obtain the best accuracy. For more information, please refer to EN ISO 5167-1.
EN ISO 5167-1 prescribes the straight inlet and outlet distances that must be complied with when installing fittings in pipe lines in order to achieve
calm flow conditions. The most important layouts that could lead to turbulence in the flow are shown below, together with the associated prescribed
minimum inlet and outlet distances. These ensure calm, problem-free measurement conditions at the measurement point.
that the electrode is maintained in a wet condition and enable the customer to calibrate the
unit without stopping the whole process or to use the special designed measuring chamber.
The specially designed measuring chamber enables to install all pH-, ORP-, conductivitytransmitters
or electrodes in all pipe systems, either directly in the main stream or in a
by-pass line. Additionally it enables to keep the electrode always wet and isolates it easily
from the main stream for calibration purposes.
Pressure and temperature ratings must be respected according to the selected fitting material.
The suitable pipe size is selected using the diagram Flow / Velocity / DN.
产品留言
标题
联系人
联系电话
内容
验证码
点击换一张
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!
  • 温馨提示:为规避购买风险,建议您在购买前务必确认供应商资质与产品质量。
  • 免责申明:以上内容为注册会员自行发布,若信息的真实性、合法性存在争议,平台将会监督协助处理,欢迎举报


产品搜索

联系我们
产品目录
Copyright@ 2003-2024  上海乾拓贸易有限公司版权所有        
 

沪公网安备 31011402005013号

点击这里给我发消息 点击这里给我发消息 点击这里给我发消息 点击这里给我发消息 点击这里给我发消息 点击这里给我发消息 点击这里给我发消息