德国哈威变量轴向柱塞泵[产品打印页面]

德国哈威变量轴向柱塞泵

1) For full stroke hmax and hVol. , 0.95
hmax = 5 mm for type MPE and 7.6 mm for type PE
These versions show a reduced efficiency due to the low viscosity.
Order example: PE 10-HFA
For dimensions, see standard versions
Versions with seal material FKM (Viton)
Type MPE 4...9-PYD, Type PE 6...16-PYD
Order example: MPE 4-PYD
For dimensions, see standard versions
Versions with seal material EPDM (e.g. brake fluid or Skydrol)
2) k = Multiplication factor for number of cylinders and
non-uniformity (sec. 5)
Lh - Service life in h
cdyn. - Dynamic load capacity of the bearing in N
hmechan. - Mechanical efficiency (ca. 0.85)
e - Eccentricity in mm
V - Displacement in cm3
p - Operating pressure in bar
n - Speed in rpm
Versions for low viscosity (e.g. HFA, or conditioned water)
Surface gas nitrided
Type PE 6(7,8,10,12)-HFA
Type MPE 4...9-AT, Type PE 6...16-AT
Order example: PE 12-AT
For dimensions, see standard versions
700 1.26 0.018 k 0.033 k
700 1.96 0.026 k 0.050 k
700 2.83 0.036 k 0.073 k
700 3.85 0.050 k 0.10 k
700 5.03 0.070 k 0.13 k
550 6.36 0.087 k 0.17 k
700 2.83 0.055 k 0.12 k
700 3.90 0.07 k 0.16 k
700 5.03 0.09 k 0.18 k
560 7.85 0.15 k 0.29 k
390 11.3 0.22 k 0.44 k
330 13.3 0.26 k 0.52 k
290 15.4 0.31 k 0.63 k
 

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!