如果您对该产品感兴趣的话,可以
产品名称:
日本SMC小型压力开关，原装SMC压力开关
产品型号:
-
产品展商:
SMC
关注指数:709
产品文档:
无相关文档
简单介绍
日本SMC小型压力开关，原装SMC压力开关
3. Do not use pressure sensors with corrosive and/or
flammable gases or liquids.
1. Do not exceed the screw-in torque of 3.5 N.m when
日本SMC小型压力开关，原装SMC压力开关
的详细介绍
日本SMC小型压力开关，原装SMC压力开关
Information that can be copied includes the following: Pressure
set values, Range settings, Display units, Output modes,
• When CH1 is copied to CH2, CH3, and CH4, information of OUT1
• When CH2, CH3, or CH4 is copied to CH1, information of OUT1 in
CH2, CH3, or CH4 will be copied only to OUT1 in CH1.
Note) When the copy function is used, the regulating pressure value
of the copied channel may change ±1 digit.
I Auto-identification function (Series PSE200 only)
This function automatically identifies the pressure range of the pressure
sensor that is connected to the multi-channel pressure sensor
controller, thus eliminating the need of having to reset the range
again after replacing the sensor. This function will be activated either
when “Aon” is set in the auto-identification mode or when the power
is turned back on in that condition. However, this function only works
in conjunction with specific pressure sensors (SMC Series
PSE53). When other pressure sensors are used, this function will
not work. When using other types of pressure sensors, first set the
auto-identification mode to “AoF”, and then proceed to setting the
• Press in the central part of Part A vertically
with a tool such as pliers.
• A sensor connector cannot be taken
apart for reuse once it is crimped. If the
wire arrangement is incorrect or if the
1. Do not drop, bump, or apply excessive impact
(PSE530, 540: 980 m/s2, PSE560: 500 m/s2, PSE550:
300 m/s2) while handling. Although the body of the
sensor may not be damaged, the inside of the sensor
could be damaged and lead to malfunction.
2. The tensile strength of the cord is PSE530: 23 N,
PSE540, 550, 560: 50 N or less. Applying a greater
pulling force to it can cause malfunction. When
handling, hold the body of the sensor—do not
dangle it from the cord.
installing piping. Exceeding this value may cause
malfunctioning of the sensor.
2. Connecting the sensor cable (optional)
Hold the female connector of the sensor cable with your fingers
and carefully insert it into the connector.
日本SMC小型压力开关，原装SMC压力开关
- 温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
- 免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报
