产品[
日本SMC2通电磁阀/SMC油用直动式2通电磁阀[产品打印页面]
]资料
如果您对该产品感兴趣的话,可以
产品名称:
日本SMC2通电磁阀/SMC油用直动式2通电磁阀
产品型号:
-
产品展商:
SMC
关注指数:352
产品文档:
无相关文档
简单介绍
日本SMC2通电磁阀/SMC油用直动式2通电磁阀
3. Pull the cover out of the case to remove the
element. Remove dust and other debris remaining
inside the case by blowing it out with
日本SMC2通电磁阀/SMC油用直动式2通电磁阀
的详细介绍
日本SMC2通电磁阀/SMC油用直动式2通电磁阀
Note 1) Do not use in atmospheres of chemicals, or where there is direct contact with it since the body may be
damaged. (Alcohol, acetone, etc. may cause damage to the product.)
Note 2) Do not use in a line where a pressurized condition is maintained since the body may be damaged.
Note 3) Polyurethane is only applicable for the ZFC050-02.
Max. 0.5 MPa (Unable to hold when pressurized)
[ZFC10, 20] 0.15 MPa [ZFC05] 0.10 MPa
Nylon, Soft nylon, Polyurethane, Soft polyurethane
Vacuum release pressure Note 2)
Operating and ambient temperature range
Element differential pressure resistance
Applicable tubing material Note 3)
Note 1) Flow rate is less than 0.003 MPa of the initial pressure drop.
Note 2) Will be manufactured upon receipt of order.
Note 3) Avoid use under pressurization.
Note 1) Do not use the product in an atmosphere and place where there is direct contact
chemicals. It may cause damage to the body. (Alcohol, acetone, etc. also cause
damage, so be sure for the product not to be close to them.)
Note 2) Do not use it in a line that is kept pressurized because it could cause the body to
Note 3) Refer to page 1110 for applicable tubing model.
2. Rotate the cover counterclockwise (乬O乭 on the
cover 佁 L marking). Refer to Figure 1.
air, etc. (Also, confirm that the O-ring is not
5. Adjust the protrusion on the cover and the slit on the case so that they match up, then push
the cover into the end of the case. Next, confirm that the cover is locked by attempting to rotate
it clockwise (乬O乭 on the cover 佁 L marking).
[Figure: ZFC05. The procedures for the ZFC10, 20 are alike.]
- 温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
- 免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报
