如果您对该产品感兴趣的话,可以
产品名称:
日本SMC真空吸盘
产品型号:
ZPT80HBNJ25-B01-A18
产品展商:
SMC
关注指数:1062
产品文档:
无相关文档
简单介绍
日本SMC真空吸盘
宽：10mm、质量：109g(单体、真空带真空压力开关及真空过滤器)
ZH 喷嘴口径：φ0.5、φ0.7、φ1.0、φ1.3、φ1.5、φ1.8、φ2.0
喷嘴和器体采用一体成形树脂。
将盒型(内置消声器)和直接配管型系列化。
日本SMC真空吸盘
的详细介绍
日本SMC真空吸盘
NBR/Silicone rubber/EPR (50°), Urethane/Fluororubber (60°)
NBR (Black), Silicon rubber (White), Urethane rubber (Brown),
Fluororubber (Black with mark ), EPR (Black with mark )
Flow characteristics are expressed in ejector
vacuum pressure and suction flow. If suction flow
rate changes, a change in vacuum pressure will
also be expressed. Normally this relationship is
expressed in ejector standard use.
In graph, Pmax is max. vacuum pressure and
Qmax is max. suction flow. The valves are
specified according to catalog use.
To serve as a vacuum release valve,
use a 2 port or 3 port valve. As for the
performance of the valve, select a valve
for a low vacuum. In addition, add a
needle valve that can regulate the flow
volume of the vacuum releasing air.
Use the atmospheric pressure or a
positive pressure for the vacuum
Changes in vacuum pressure are expressed in
1. When ejector suction port is covered and
made airtight, suction flow becomes 0 and
vacuum pressure is at maximum value
2. When suction port is opened gradually, air can
flow through, (air leakage), suction flow
increases, but vacuum pressure decreases.
3. When suction port is opened further, suction
flow moves to maximum value (Qmax), but
vacuum pressure is near 0. (atmospheric
When vacuum port (vacuum piping) has no
leakage, vacuum pressure becomes
- 温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
- 免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报
