产品[
DG4V-3-6C3-VM-U-HH7-60/威格士叠加式单向阀[产品打印页面]
]资料
如果您对该产品感兴趣的话,可以
产品名称:
DG4V-3-6C3-VM-U-HH7-60/威格士叠加式单向阀
产品型号:
DG4V-3-6C3-VM-U-HH7-60
产品展商:
威格士VICKERS
关注指数:509
产品文档:
无相关文档
简单介绍
DG4V-3-6C3-VM-U-HH7-60/威格士叠加式单向阀
a. improper pressure relief setting
b. damaged or broken spring
c. valve held off seat
d. damaged valve seat
DG4V-3-6C3-VM-U-HH7-60/威格士叠加式单向阀
的详细介绍
DG4V-3-6C3-VM-U-HH7-60/威格士叠加式单向阀
This manual provides service information for Eaton
Models 70360 variable displacement piston pumps. Step
by step instructions for the complete disassembly,
inspection, and reassembly of the pump are given. The
following recommendations should be followed to insure successful repairs.
Remove the pump from the application.
Cleanliness is extremely important.
Clean the port areas thoroughly before disconnecting the hydraulic lines.
Plug the pump ports and cover the open hydraulic lines immediately after they're disconnected.
Drain the oil and clean the exterior of the pump before making repairs.
Wash all metal parts in clean solvent.
Use compressed air to dry the parts. Do not wipe them dry with paper towels or cloth.
Compressed air should be filtered and moisture free.
Always use new seals when reassembling hydraulic pumps.
Lubricate the new rubber seals with a petroleum jelly (Vaseline? before installation.
Torque all bolts over gasketed joints, then repeat
the torquing sequence to makeup for gasket
c. misadjusted, damaged or broken neutral return spring
Inspect Servo Control Valve for: (if used)
a. proper inlet pressure
b. misadjusted, damaged or broken neutral return spring
c. galled or stuck control spool
d. galled or stuck servo piston
Inspect System Relief Valves for:
a. obstructed air flow (air cooled)
b. obstructed water flow (water cooled)
c. improper plumbing (inlet to outlet)
c. poppet valve held off seat
12 Inspect Motor for:
- 温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
- 免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报
