如果您对该产品感兴趣的话,可以
产品名称:
DG5V-8H-2C-T-MU-C10
产品型号:
DG5V-8H-2C-T-MU-C10
产品展商:
威格士VICKERS
关注指数:552
产品文档:
无相关文档
简单介绍
DG5V-8H-2C-T-MU-C10
15V. Do not exceed 30V command
signalc. Decrease voltage: the LED should
go off when the voltage is less than
Switch off power supply and
command/input signal and then
DG5V-8H-2C-T-MU-C10
的详细介绍
DG5V-8H-2C-T-MU-C10
IEC 529: IP67 (when correctly installed
with interface seal in place)
Fully short-circuit and reverse-polarity
PA6 glass reinforced plastic
(conforms to UL-94HB). Color: gray
ISO 4400 (DIN 43650)
Ø 5 to 10 mm (0.197 to 0.394 dia)
0,5-1,0 mm2 (20-17 AWG)
–20 to +70C (–4 to +158F)
mounting it on the valve solenoid,
apply 24V DC (20 to 30V limits) to
the “power input” terminals.
Check for correct plug function by
illumination/non-illumination of the
a. Apply less than 2 to 3 volts to the
input terminal: the LED should not
b. Increase voltage: the LED should
illuminate when the voltage reaches
install plug on solenoid. Ensure that
all seals are fitted correctly and
clamped as the retaining screw is
tightened: this is essential in
providing IP67 protection.
Ensure that the hydraulic system will
not cause any erratic movement of
– Switch on power supply again.
– Repeat LED/function check as in 2.
An LED malfunction now indicates a
short circuit at the load.
Successful completion of these
checks means that the plug and load
are ready for use.
- 温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
- 免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报
