产品[
SY7120-5DZ-02-F2/SMC电磁阀资料[产品打印页面]
]资料
如果您对该产品感兴趣的话,可以
产品名称:
SY7120-5DZ-02-F2/SMC电磁阀资料
产品型号:
SY7120-5DZ-02-F2
产品展商:
SMC
关注指数:371
产品文档:
无相关文档
简单介绍
SY7120-5DZ-02-F2/SMC电磁阀资料
3. Install piping after confirming IN and OUT.
Be sure that chips from the pipe threads and sealing material
do not get inside the piping.
SY7120-5DZ-02-F2/SMC电磁阀资料
的详细介绍
SY7120-5DZ-02-F2/SMC电磁阀资料
1. Design circuits so that back pressure or back flow
will not occur. If back pressure occurs, it may
1. When selecting a model, a model that does not
specification ranges after due consideration of the
purpose of use, specification requirements, and
operating conditions (fluid, pressure, flow rate,
temperature, environment).
2. Do not use at temperatures at or above the boiling
3. Never use with gases, including air.
4. Do not use in locations where peak pressure rises
to 1 MPa or more due to water hammer, surge
1. Use a quick change filter for filtration of water,
alkali and cleaning fluids, etc.
2. There may be circumstances where a seal or an Oring
ridges exposed at the end of male threads.
Flush the piping lines at the time of initial use and when
1) Replace the element after removing the liquid from the
piping and confirming that pressure inside the filter is zero
1. Install and connect piping ensuring space
necessary for maintenance work and inspections.
2. Before piping is connected, air blow (flush) or
wash it thoroughly to remove chips, cutting oil and
other impurities from inside the piping.
Further more, conduct replacement using an IN, OUT
differential pressure of 0.1 MPa as a guide.
2) Start replacement after confirming that the temperature of
the filter body is within a range of 0 to 40°C.
3) When setting the element, be sure that it does not tilt
- 温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
- 免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报
