产品[
DGMDC-3-X-TK-41/伊顿VICKERS比例阀[产品打印页面]
]资料
如果您对该产品感兴趣的话,可以
产品名称:
DGMDC-3-X-TK-41/伊顿VICKERS比例阀
产品型号:
DGMDC-3-X-TK-41
产品展商:
威格士VICKERS
关注指数:602
产品文档:
无相关文档
简单介绍
DGMDC-3-X-TK-41/伊顿VICKERS比例阀
None—Select When No Horn Wire Used
SAE J928 Pin and Double End Connector
Blade Receptacle—Insulated
(Compatible with SAE J858a)
One Horn Button (Only with One Horn Wire)
DGMDC-3-X-TK-41/伊顿VICKERS比例阀
的详细介绍
DGMDC-3-X-TK-41/伊顿VICKERS比例阀
Rated Tortional 81Nm [60 lb-ft]
Rated Bending Moment 136 Nm [100 lb-ft]
Rated Radial Load 86 kg [150 lb]
Rated Axial Load 86 kg [150 lb]
Tortional Friction Drag 0,23 kg [2 lb-in]
Recommended Wheel Nut Torque 47 Nm [35 lb-ft]
Round Series 5 (38mm [1.5 inch] O.D.)
Heavy Wall (41,4 [1.63 inch] O.D.)
Tabbed Flange
Standard With flat Flange
(38mm [1.50 inch] O.D.) (No Tabs)
Tilt Column with Flat Flange
12 Tooth Spline for Steering Unit
3/4 inch “D” Section
(for Noise Isolator)
Standard for all rigid and tilt columns
Available with or without Horn Wire
Available with or without Horn Wire
Bending moments are taken about the
plane of the column mounting surface.
Radial load at the bearing centerline
must not exceed the horizontal bending moment rating.
Available with or without Horn Wire
Available with or without Horn Wire
Not Available with Horn Wire
Not Available with Horn Wire
Not Available with Horn Wire
Not Available with Horn Wire
Five Steps for “How to Order Your Column”
1 Select Jacket/Base Type
2 Select Lower Shaft Type
3 Select Upper Shaft End Type
4 Select Length (use suggested standard length)
• Please contact your Eaton Representative if any request
differs from our catalog offerings.
- 温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
- 免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报
