德国力士乐轴向柱塞泵,BOSCH轴向柱塞泵效果图[产品打印页面]

德国力士乐轴向柱塞泵,BOSCH轴向柱塞泵效果图
Robust pump with long service life
Very high total efficiency
The values in the table are theoretical values,
 without consideration of efficiencies and tolerances. The values are rounded.
Exceeding the maximum or falling below the minimum permissible values can lead to a loss of function,
Finer filtration improves the cleanliness class of the hydraulic fluid; thus, the life cycle of the axial piston unit increases.
At least the cleanliness class 20/18/15 according to ISO 4406 is to be complied with.
With hydraulic fluid temperatures above 90 °C, at least cleanliness class 19/17/14 according to ISO 4406 is necessary.
 a reduction in operational service life or total destruction of the axial piston unit.
Other permissible limit values, such as speed variation,
reduced angular acceleration as a function of
the frequency and the permissible angular acceleration at start
(lower than the maximum angular acceleration) can be found in data sheet 90261.
High power density
Large variety of available nominal sizes allows exact adjustment to the application
Optional with long-life bearings for the nominal sizes 250 to 1000
Bent-axis design
The axial piston unit is designed for operation with mineral oil HLP according to DIN 51524.
Application instructions and requirements for hydraulic fluids should be taken from the following data sheets before the start of project planning:
90220: Hydraulic fluids based on mineral oils and related hydrocarbons
90221: Environmentally acceptable hydraulic fluids
90222: Fire-resistant, water-free hydraulic fluids (HFDR, HFDU)
90223: Fire-resistan, water-containing hydraulic fluids (HFAE, HFAS, HFB, HFC)
90225: Restricted technical data for operation with fire-resistant hydraulic fluids

德国力士乐轴向柱塞泵,BOSCH轴向柱塞泵效果图

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!