ASCO低功率电磁阀,世格电磁阀技术文章[产品打印页面]

ASCO低功率电磁阀,世格电磁阀技术文章
- the weight of the load,
Cushioning capacity
Graph II is used to determine the type of cushioning needed.
If the intersection point of the final velocity and the load falls
below the curves, the internal cushions are adequate. If this
图II用于确定所需的缓冲类型。
如果终速度和载荷的交点落下在曲线下方，内部靠垫足够。
OTHER ACCESSORIES:
• Tube support brackets: You must determine if intermediate
tube support brackets are required, depending on the weight of
the charge and the stroke. (see chart on tube support sheet).
• Reed switch or magneto-inductive detectors for position
control
- the position of the load (centered on the carrier or elsewhere),
- the final or average velocity.

如果这不是这样，你必须选择一个更大的圆柱体更大的缓冲能力，
或使用减震器可作为附件使用。
如果你确定了内部垫子将在其容量附近使用而且运动非常激烈，使用是明智的可选减震器。
其他附件：
is not the case, you must either choose a larger cylinder with
greater cushion capacity, or use the shock absorbers which
are available as an accessory. If you have determined that the
internal cushions would be used near their maximum capacity
and there is highly intense movement, it would be wise to use
the optional shock absorbers.

ASCO低功率电磁阀,世格电磁阀技术文章

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!