产品[
张家港YUKEN柱塞泵性能A10-F-R-01-C-K-10[产品打印页面]
]资料
如果您对该产品感兴趣的话,可以
产品名称:
张家港YUKEN柱塞泵性能A10-F-R-01-C-K-10
产品型号:
A10-F-R-01-C-K-10
产品展商:
YUKEN
关注指数:433
产品文档:
无相关文档
简单介绍
张家港柱塞泵性能A10-F-R-01-C-K-10
, the AR16 is smaller than the A16 (32 design).
Also, the mass of AR16 is substantially Length of piping should be less than 1 m (3.3 ft.), and the
pipe end should be submerged in oil.
In case AR16 and AR22 pump, a screw-in torque of
张家港柱塞泵性能A10-F-R-01-C-K-10
张家港YUKEN柱塞泵性能A10-F-R-01-C-K-10
的详细介绍
w
张家港柱塞泵性能A10-F-R-01-C-K-10
上海乾拓贸易有限公司
电 话：
手 机；
报价QQ；2880626083
邮箱；@163.com
联系人：杨婷玉
地址：上海市嘉定区江桥嘉涌路6号楼713
MAC型号部分现货：250B-111JA
IFM部分现货型号：EVC207
WLLSHEN现货部分现货：DSG-G02-2B2-N-A26D
CAM0OZZI康茂盛部分现货：G77 24VDC 48VAC
ABB型号部分现货：CAL5-11
VICKERS（威格士）型号部分现货： B-507833
indicated in the dimensional comparison presented
below, the AR16 is smaller than the A16 (32 design).
Also, the mass of AR16 is substantially Length of piping should be less than 1 m (3.3 ft.), and the
pipe end should be submerged in oil.
In case AR16 and AR22 pump, a screw-in torque of fitting
is 40 to 50 Nm (354 to 443 IN.1bs.). Do not apply bending
and thrust torque to the fitting.
9. Bleeding Air
It may be necessary to bleed air from pump case and outlet
line to remove causes of vibration. An air bleed valve
(Model No. ST1004--10, Catalogue No.: Pub. EC-
3001) is recommended for this purpose.
[Recommended Drain Pipinglighter than the
油基础油如抗磨型液压油
油或R＆O（防锈和氧化抑制剂）型液压
等同于ISO VG-32或46的油。推荐的
粘度范围为20-400mm 2 / s（98-1800SSU）
温度范围从0到60°C（32到140°F），
这两者都必须满足上述的使用
张家港柱塞泵性能A10-F-R-01-C-K-10
- 温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
- 免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报
