产品[
VFS3100-1FZ，原装SMC高压用2通电磁阀[产品打印页面]
]资料
如果您对该产品感兴趣的话,可以
产品名称:
VFS3100-1FZ，原装SMC高压用2通电磁阀
产品型号:
VFS3100-1FZ
产品展商:
SMC
关注指数:336
产品文档:
无相关文档
简单介绍
VFS3100-1FZ，原装SMC高压用2通电磁阀
02-1994冷却水系统 - 循环型 - 化妆水）。
注3）（1）环境温度：32℃，设施水温
：25℃（水冷式冷冻），（2）循环流体温
度：20°C，（3）循环流体流速：在价值观
VFS3100-1FZ，原装SMC高压用2通电磁阀
的详细介绍
VFS3100-1FZ，原装SMC高压用2通电磁阀
在季节或地点，环境温度可能跌破冰点，请另行咨询SMC。
注2）如果清澈的水被使用，请使用水符
注4）热散热器的规格不具有加热功能。
注5）温度在热冷水机组电源插座时，循环
液具有额定流量，以及设施与水的循环液供应和回报直接连接。
安装环境，电源和设施的水应在规定的范围内是稳定的。
注意热冷却器出口的6）能力时，循环液温度为20°C。
注7）所需流量的冷却能力或维持温度的稳定。
Momentary loss of AC power supply, DC power supply has excessive temperature, or the
thermo-module has been short-circuited.
The internal temperature sensor has exceeded the upper limit where the Chemical
The internal temperature sensor has exceeded the lower limit where the Chemical
The temperature cannot be changed even at 100% output, due to overload or disconnection
The thermostat has been activated due to insufficient flow rate of the circulating fluid or
facility water or high temperature.
The external temperature sensor has been disconnected or short-circuited. (Only detected
when in learning control, auto-tuning operation 2, or external sensor control)
采用了氟树脂热交换机，实现化学液的直接温控。
氟树脂热交换机可以适应于多种化学液。
时所使用的额定流量下，打开标准手动
旁路阀和保持一个循环液流量相当于额定流量。
注8）所需的流量时的负荷作用于所示
的冷却能力时，该设施的水温度为25℃。
注9）购买一个接地故障断路器为30 m
A的电流灵敏度分开。 （选项“B”也可以。请参阅“如何订购”。）
注10）质量在干燥状态下没有循环液体。
注11）在冰箱的ON / OFF控制的情况下。对于其他条件，请参阅附注3）。
The temperature has exceeded the upper or lower limit of the set temperature.
The remote ON/OFF contact is set to be off. (This alarm is not generated by the relay output.)
The CPU has crashed due to noise, etc.
The contents of the CPU cannot be read out correctly when the power supply is turned on.
The data cannot be written to EEPROM.
The number of times of writing to EEPROM has exceeded the maximum value.
The internal temperature sensor has been disconnected or short-circuited.
Auto-tuning has not been completed within 60 minutes.
The air-cooled fan alarm of the power supply has been activated.
The fluid leak sensor has detected leakage of fluid.
The contents of the back-up data cannot be read out correctly when the power supply is
- 温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
- 免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报
