FESTO电磁阀,SMC电磁阀,SMC定位器,SMC气管,SMC比例阀,ABB电机,HYDAC电磁阀,DAIKIN油泵,YUKEN比例阀,schrack继电器,ATOS电磁阀,SMC气缸,FESTO气缸,BURKERT电磁阀,ASCO电磁阀

产品资料
首页 >>> 产品目录 >>> 日本SMC电磁阀/气缸 >>> SMC真空组件
泵阀网 >>> 展馆展区 >>> 阀门 >>> 电磁阀 >>> SMC气动元件参数,CP95SDB100-500
产品[

SMC气动元件参数,CP95SDB100-500[产品打印页面]

]资料
如果您对该产品感兴趣的话,可以 产品名称: SMC气动元件参数,CP95SDB100-500
产品型号: -
产品展商: SMC
关注指数:857
产品文档: 无相关文档

简单介绍

SMC气动元件参数,CP95SDB100-500 (Example) To get pressure drop at 0.3 MPa of air pressure, 5 m3 /min (ANR) of air flow and model HAW75-20, use ΔP = 0.0065 MPa at 0.7 MPa from the table and convert P1 to

SMC气动元件参数,CP95SDB100-500  的详细介绍
SMC气动元件参数,CP95SDB100-500
1. Inspect the quality of the coolant water
and replace the circulating water on a regular
basis. If the coolant water is cooled in
a cooling tower, it is susceptible to the adhesion
2. If there is a likelihood that the coolant water
will be frozen, drain the coolant water
to prevent damage. Also, drain the coolant
Outlet air temperature can be calculated with
inlet air temperature, cooling water temperature
and amount of air in the following procedure.
(Example) Inlet air temperature: 100°C,
Cooling water temperature: 20°C, Cooling
water flow: 17 l/min
Air flow: 2000 l/min (ANR), Air pressure: 0.7
MPa, Model: HAW22-14
Outlet air temperature at above conditions
Use outlet air temperature of 37°C from
outlet air temperature table. At this time
correction factor line becomes .
To get correction factor of 1.3 use cooling
water temperature correction factor at
To get outlet air temperature divide 37°C
from (1) by 1.3 from (2).
Outlet air temperature = 37 ÷ 1.3 =
1. Install the unit horizontal with pipe line.
2. Make sure to correctly connect the compressed
air inlet/outlet and the coolant
water inlet/outlet.
3. Use union joints to connect the coolant
water pipes so that they can be easily removed
during maintenance.
4. Connect a drain pipe because a large
amount of drainage is created when the
compressed air is cooled.
The drain pipe must have a minimum pipe
bore of 10 mm, and a maximum length of
5 m (when installing an optional auto
water when the equipment will not be
used for a long period of time.
3. If the cooling performance has been reduced,
clean the inside of the coolant water
pipes. (Refer to the instruction manual
for details on the cleaning.)
产品留言
标题
联系人
联系电话
内容
验证码
点击换一张
注:1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!
  • 温馨提示:为规避购买风险,建议您在购买前务必确认供应商资质与产品质量。
  • 免责申明:以上内容为注册会员自行发布,若信息的真实性、合法性存在争议,平台将会监督协助处理,欢迎举报


产品搜索

联系我们
产品目录
Copyright@ 2003-2024  上海乾拓贸易有限公司版权所有        
 

沪公网安备 31011402005013号

点击这里给我发消息 点击这里给我发消息 点击这里给我发消息 点击这里给我发消息 点击这里给我发消息 点击这里给我发消息 点击这里给我发消息