产品[
进口SMC电磁换向阀,VFN2120N-5DZ-02[产品打印页面]
]资料
如果您对该产品感兴趣的话,可以
产品名称:
进口SMC电磁换向阀,VFN2120N-5DZ-02
产品型号:
-
产品展商:
SMC
关注指数:333
产品文档:
无相关文档
简单介绍
进口SMC电磁换向阀,VFN2120N-5DZ-02
注2）如果传感器输入接口部分工
作电压侧短路与0V端，里面的流量监控器将被损坏。
注3）开关量输出及累计脉冲输出可以在初始设置中选择。
注4）该系统的精度时，其适用的流量传感器相结合。
进口SMC电磁换向阀,VFN2120N-5DZ-02
的详细介绍
进口SMC电磁换向阀,VFN2120N-5DZ-02
注1）固定SI单位[升/分钟或L]将交换机的类
型进行设置未经单位切换功能。
（“-M”为后缀在型号末尾。）累计流量复位时
注）固定SI单位（升/分钟，升，
立方米或M3x10自）用于将类型设置
注1）的材料和流体相容性检查清单提供的参考值仅供参考。
注2）这可能是一些流体可渗透取决于
Although the circuit at the output side of the switch is surge
protected, damage may still occur if a voltage surge is applied
repeatedly. When a load which generates a surge, such as
from a relay or solenoid valve is directly driven, use a switch
with a built-in surge absorbing element.
4. Be sure to verify the applicable fluid.
流体的类型，其浓度和温度。任何渗透
液体可能会影响产品的使用寿命。
因此，使用这些流体类型时，通过测试验证它的流体提前，
之前使得使用它的决定。
·兼容性指示为流体的温度在90℃或更低。
·本产品不具有防爆结构。一定要采取措施防止
Use of the switch outside of the specified voltage range can
cause not only a malfunction and damage to the switch, but
can also cause electrocution and fire.
2. Do not exceed the maximum allowable load
A load exceeding the maximum load specification can cause
3. Do not use a load that generates a surge
The switches do not have an explosion proof rating. To prevent
possible fire hazard, do not use with flammable gases or fluids.
5. Monitor the internal voltage drop of the switch.
When operating below the specified voltage, it is possible that
the load may be ineffective even though the pressure switch
function is normal. Therefore, the formula below should be
satisfied after confirming the minimum operating voltage of the
- 温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
- 免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报
