如果您对该产品感兴趣的话,可以
产品名称:
CDM2B25-50,进口日本SMC带阀气缸
产品型号:
CDM2B25-50
产品展商:
SMC
关注指数:414
产品文档:
无相关文档
简单介绍
CDM2B25-50,进口日本SMC带阀气缸
Install the solenoid valve and the plate, and tighten the small round
head screws, with a screw driver. After tightening, press the manual
CDM2B25-50,进口日本SMC带阀气缸
的详细介绍
CDM2B25-50,进口日本SMC带阀气缸
Rubber bumper
Not required (Non-lube)
M5 x 0.8
Basic style, Axial foot style, Rod side flange style
Bore size (mm)
50 to 150 mm/s
0.090J
Operation type can be
changed to rod extended
when energized or rod
retracted when energized.
An auto switch cylinder with
the switch installed can also
be manufactured.
Proof pressure
to the rod retracted when energized.
1. Using a screwdriver, loosen the two small round head screws, and
remove the plate and the solenoid valve. At this time, instead of
removing the plate and the solenoid valve separately, remove them
together, with the round head screws remaining inserted.
Maximum operating pressure
Minimum operating pressure
Ambient and fluid temperature
Cushionoperating conditions. When the cylinder is viewed from above, the
position of the gasket is as shown in the figure below
Lubrication
Stroke length tolerance
Port size
Mounting
Piston speed
Allowable kinetic energy
Double acting, Single rod
0.15 MPa
–10 to 50°C (No freezing)
- 温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
- 免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报
