如果您对该产品感兴趣的话,可以
产品名称:
进口SMC标准气缸,SMC气缸分类
产品型号:
CDA2B100-200-Y59BZ-XC4
产品展商:
SMC
关注指数:505
产品文档:
无相关文档
简单介绍
进口SMC标准气缸,SMC气缸分类
The spring that is built into the cylinder provides only
enough force to retract the piston rod. Thus, if a load
is applied,
进口SMC标准气缸,SMC气缸分类
的详细介绍
进口SMC标准气缸,SMC气缸分类
The following fittings are recommended for this cylin-
der connection. However, there may be a case where
the piston speed exceeds 500 mm/sec. even with the
recommended fittings for this cylinder. Use a speed
controller in such cases
q Fit an auto switch into the auto switch
mounting groove to set it roughly to the
mounting position for an auto switch.
In addition to the above fittings and hose nipples, the
below fittings can also be attached to the cylinder.
When using the below fittings be sure to provide a
speed controller after adjusting it to 500 mm/s or less.
w After reconfirming the detecting position,
tighten the auto switch mounting screw∗ to
secure the auto switch.
e Modification of the detecting position
should be made in the condition of q.
When tightening an auto switch mounting screw,
use a watchmaker’s screwdriver with a handle of
approximately 5 to 6 mm in diameter.
(Use a tightening torque of approximately 0.10 to 0.20 N·m.)
Tightening torque for auto switch
Do not use it in such a way that a load could be ap-
plied to the piston rod during the retraction.
the piston rod may not be able to retract to
the end of the stroke.
- 温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
- 免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报
