如果您对该产品感兴趣的话,可以
产品名称:
费斯托（FESTO)止动气缸
产品型号:
543745
产品展商:
其它品牌
关注指数:1072
产品文档:
无相关文档
简单介绍
费斯托（FESTO)止动气缸产品代号: 543745止动气缸 不带弹簧, 可调的前端液压缓冲。行程 30 mm 活塞直径 50 mm 缓冲 P: 两端带弹性缓冲环/板 装配位置 垂直 工作模式 单作用 拉的动作
费斯托（FESTO)止动气缸
的详细介绍
费斯托（FESTO)止动气缸
产品代号: 543745
止动气缸 不带弹簧, 可调的前端液压缓冲。
行程 30 mm
活塞直径 50 mm
缓冲 P: 两端带弹性缓冲环/板
装配位置 垂直
工作模式 单作用
拉的动作
设计结构 带摆杆夹紧装置的活塞杆
位置检测 用于接近式传感器
Variants 单端活塞杆
防止扭转/导向 导向杆
Operate your equipment with unlubricated
compressed air if possible.
Festo valves and cylinders are
designed for operation under normal
use without any additional lubrication,
yet still have a long service life.
The quality of compressed air downstream
from the compressor must
correspond to that of unlubricated
compressed air. If possible, do not
operate all of your equipment with
lubricated compressed air. The lubricators
should, where possible, always
Incorrect additional oil and too high
an oil content in the compressed air
reduces the service life of a valve
terminal.
Use Festo special oil OFSW-32 or the
alternatives listed in the Festo
catalogue (as specified in
DIN 51 524-HLP32; basic oil viscosity
32 CST at 40 °C).
Bio-oils
When using bio-oils (oils which are
based upon synthetic or native ester,
e.g. rapeseed oil methyl ester), the
maximum residual oil content of
0.1 mg/m3must not be exceeded
(see ISO 8573-1 Class 2).
Mineral oils
When using mineral oils (e.g. HLP oils
to DIN 51 524, parts 1 through 3) or
similar oils based on poly-alphaolefins
(PAO), the maximum residual
oil content of 5 mg/m3 must not be
exceeded (see ISO 8573-1 Class 4).
A higher residual oil content irrespective
of the compressor oil cannot be
permitted, as the basic lubricant
would be flushed out over time.
工作压力 2 - 10 bar
工作介质 过滤压缩空气
耐腐蚀等级 CRC 1
环境温度 5 - 60 °C
冲击力 3.000 N
产品重量 1.800 g
安装类型 带通孔
气动连接 G1/8
材料备注 含有PWIS 物质
符合 RoHS
盖子的材料信息 压铸铝
密封件的材料信息 NBR
外壳的材料信息 锻造铝合金
活塞杆的材料信息 高合金钢, 耐腐蚀
- 温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
- 免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报
