产品[
DG4V-3-2A-M-U-H7-6X/威格士盖板插装阀[产品打印页面]
]资料
如果您对该产品感兴趣的话,可以
产品名称:
DG4V-3-2A-M-U-H7-6X/威格士盖板插装阀
产品型号:
-
产品展商:
威格士VICKERS
关注指数:580
产品文档:
无相关文档
简单介绍
DG4V-3-2A-M-U-H7-6X/威格士盖板插装阀
2 Remove the 9 cap screws and disassemble
the motor in the vertical position as
shown in figures 1. Note placement of small
DG4V-3-2A-M-U-H7-6X/威格士盖板插装阀
的详细介绍
DG4V-3-2A-M-U-H7-6X/威格士盖板插装阀
1 Cleanliness is extremely important when
repairing hydraulic motors. Work in a clean
area. Before disconnecting the hydraulic
motor thoroughly clean the exterior. Remove
motor from application and drain the oil from
the motor before disassembly.
For Assemblies with a Back Pressure Relief Valve
2 Install poppet, shims, spring and plug assembly into end cap
cavity. Torque plug/o-ring to 18-22 Nm [162-198 lb-in]. Plug/o-ring
may have light coat of oil or preservative.
Check all mating surfaces. Replace any parts that have scratches or
burrs that could cause leakage. Clean all metal parts in clean solvent.
Blow dry with air. Do not wipe dry with cloth or paper towel because
lint or other matter can get into the hydraulic system and cause
damage. Do not use grit paper or file or grind these parts.
Note: Lubricate all seals with clean petroleum jelly (Vaseline). A good
service policy is to replace all old seals with new seals.
Refer to parts lists covering your Series VIS 45 Two Speed Hydraulic
Motor when ordering replacement parts.
3 Remove shuttle valve (and relief valve if
applicable) from end cap.
4 Remove two plugs from end cap, end
5 Remove two plugs,spring, and spool from
6 Check all mating surfaces. To reduce the
chance of leakage, replace any parts that have
scratches or burrs. Wash all metal parts in
clean solvent. Blow them dry with pressurized
air. Do not wipe parts dry with paper
- 温馨提示：为规避购买风险，建议您在购买前务必确认供应商资质与产品质量。
- 免责申明：以上内容为注册会员自行发布，若信息的真实性、合法性存在争议，平台将会监督协助处理，欢迎举报
